User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

5.6.2. How to restore A3 device’s settings with

configuration file

1. Go to Administration > Backup/Restore > Restore Configuration File

2. Click Browse, then select suitable configuration file (.tar.gz)

3. Click Restore backup

5.7. Customization

Network administrator may create customized settings as factory

default settings for A3 products. Once the customized configuration file

is imported, A3 products restore with the customized settings as default

settings rather than the original default settings.

Figure 82 – Default Configuration Customization

5.7.1. How to create customized configuration file

for A3 products

1. Go to Administration > Customization > Default Configuration

Customization

2. Click Product Customization Template to download configuration

template file (.tar.gz)

3. Use 7-zip software to open the template file, and edit the files in the

factory_default.zip.

4. Edit system, network, and wireless files with the desired settings;

system

Contain settings about SNMP, syslog …etc

network

Contain network settings about all interfaces, such as

IP address, VLAN enabling, and STP …etc.

wireless

Contain settings about radio interfaces, including

radio enabling, WLAN settings … etc

5. Save the modified files

6. Go to Administration > Customization > Default Configuration

Customization

7. Click Browse, then select the modified customization file

8. Click Install