User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

5.4. Firmware Update

Network administrator updates (upgrades or downgrades) A3 device’s

firmware via web UI.

Figure 79 – Firmware Update

5.4.1. How to update A3 device’s firmware

1. Go to Administration > Firmware Update

2. Click Browse, then select suitable firmware image file (.bin)

3. You may select:

Keeps all settings

Device keeps all operating setting

after updating firmware

Keep Network Address settings only

Device keeps IP address, subnet

mask only after updating firmware;

the other settings will be restored as

default settings

Full Factory Reset

Device restores all setting as default

settings after updating firmware

4. Click Upload Image

5. If uploaded firmware image is valid, click Proceed to continue;

otherwise, error message will be shown

6. Wait unit A3 completes updating firmware

7. Login with correct username and password, then check the

firmware version on About > Product Version

Caution:

- Do not interrupt the process of firmware update. Please

maintain network connection and power supply during

updating firmware; otherwise A3 may not function.