User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

5.2. SNMP

Simple Network Management Protocol (SNMP) is a Network

management protocol used almost exclusively in TCP/IP networks.

SNMP provides a means to monitor and control network devices, and

to manage configurations, statistics collection, performance, and

security.

Figure 76 – SNMP Configuration

5.2.1. How to enable SNMP in A3 products

1. Go to Administration > User Admin > SNMP

2. Select Enable SNMP checkbox to enable SNMP function

3. Type in suitable string in Read Community; the string of Read

Community between Network Manage System (NMS) and A3 must

be identical, otherwise, NMS cannot get information from A3. public

is default setting.

4. Type in suitable string in Write Community; the string of Write

Community between Network Manage System (NMS) and A3 must

be identical, otherwise, NMS cannot modify A3’s setting. netman is

default setting.

5. Click Submit

6. Click Save & Apply

Note:

- A3 support up to four trap host at the same time. The

information about trap hosts will be listed in the trap host table

(see Figure 77)

Figure 77 – Trap host table