User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

3. Type a new password in Password

4. Type a new password again in Confirm Password

5. Click Submit

Note:

- Please login as admin for modifying password

5.1.2. RADIUS authentication

5.1.2.1. How to enable RADIUS authentication in A3 products

1. Go to Administration > User Admin > Login Authentication Setting

2. Select RADIUS authentication or RADIUS + Local authentication in

Authentication Type

3. Select suitable authentication in Authentication Mode; you can

select:

PAP

EAP

4. Select suitable encryption in Encryption Algorithm; you can select:

For authentication Mode is PAP:

Disable

For authentication Mode is EAP:

PEAP-GTC

PEAP-MS-CHAP-V2

TTLS-PAP

TTLS-CHAP

TTLS-MS-CHAP

TTLS-MS-CHAP-V2

5. Provide IP address of remote RADIUS server in RADIUS Server

6. Provide suitable secrets in Secret of RADIUS Secret.

7. Left Secondary RADIUS Server blank if no backup RADIUS server is

available

8. Provide Secondary RADIUS Secret blank if no backup RADIUS server

is available

9. Click Submit

10. Click OK (see Figure 75)

Figure 75 – Popup window for confirming the change of RADIUS authentication