User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

3. Type in the maximum number of data frame between 1 and 64 that

A3 pushes them into single PPDU; 64 is default setting

4. Select AMSDU checkbox to enable aggregation of MAC service

data unit; A3 pushes aggregated MSDU (MAC service data units)

into a single MPDU

5. Click Submit

6. Click Save & Apply

4.2.12.1.2. How to enable short guard interval

1. 2.4G Interface: Go to Configuration > Wireless > Radio0 > Advanced

> Advanced Settings

5G Interface: Go to Configuration > Wireless > Radio1 > Advanced >

Advanced Settings

Figure 64 – Short GI Setting

2. Select ShortGI checkbox to enable short guard interval

3. Click Submit

4. Click Save & Apply

4.2.12.1.3. Configure the number of transmit radio chains and receive

radio chains

Figure 65 – transmit radio chains and receive radio chains setting

1. 2.4G Interface: Go to Configuration > Wireless > Radio0 > Advanced

> Advanced Settings

5G Interface: Go to Configuration > Wireless > Radio1 > Advanced >

Advanced Settings

2. Select the maximum number of transmission between 1 and 3 on

Max Tx Streams

3. Select the maximum number of transmission between 1 and 3 on

Max Rx Streams

4. Click Submit

5. Click Save & Apply

5.1.4.1.1. Configure beacon interval of BSS

Figure 66 – Beacon Setting

1. 2.4G Interface: Go to Configuration > Wireless > Radio0 > Advanced

> Advanced Settings

5G Interface: Go to Configuration > Wireless > Radio1 > Advanced >

Advanced Settings

2. Change the following settings:

Beacon Interval Auto – Select checkbox that A3 tunes the interval of

beacon transmissions of each supported BSS automatically