User's Manual

56
Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Guide
Altai Technologies Ltd. All rights reserved
4.2.12. Advanced Settings on Radio Interface
A3 provides advanced settings on each radio interface; these settings
include data rate, AirFi, Tx/Rx Stream settings … etc.
Caution:
- Inappropriate configuration may bring negative impact on the
network performance
- It is not suggested to change the parameters in Advanced
Radio Settings unless you are experienced administrators.
- Default setting is recommended
Figure 62 – Radio 0’s Advanced Settings
4.2.12.1. Advanced Settings
4.2.12.1.1. Configure AMPDU and AMSDU on radio interface
Figure 63 – AMPDU and AMSDU Setting
1. 2.4G Radio: Go to Configuration > Wireless > Radio0 > Advanced >
Advanced Settings
5G Radio: Go to Configuration > Wireless > Radio1 > Advanced >
Advanced Settings
2. Select AMPDU checkbox to enable aggregation of MAC protocol
unit