User's Manual

53
Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Guide
Altai Technologies Ltd. All rights reserved
4.2.9. DHCP
A3 series products have built-in DHCP server; it can dynamically
distribute network configuration parameters to the connected end
devices on all LAN interfaces.
Note:
- DHCP server can be enabled on Gateway mode ONLY
Figure 57 – DHCP Server Setting
4.2.9.1. Enable DHCP server
1. Go to Configuration > Network > DHCP
2. Select Server Mode on DHCP Server
3. Click Submit
4. Click under Detail of each pool
Figure 58 – DHCP Server – Address Pool Setting
5. Select Enable Pool check box
6. Type in IP address on Start IP Address
7. Type in IP address on End IP Address
8. Specify lease time between 60s and 604800s in Default Lease Time;
86400s is default setting
9. Click Submit
10. Click Save & Apply