User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

4.1.4.2. Radio 1 – 5GHz Radio

Figure 40 – Radio 1 General Setting of Station

4.1.4.2.1. Radio General Configuration

1. Go to Configuration > Wireless > Radio1(5G) > General

2. Select Enable Radio checkbox to enable radio interface

3. Select Station in Radio Mode

4. Change the following settings:

Dynamic Radio Frequency Selection (DFS) – Select to enable

automatic channel selection that selects the least congested

channel where radar is not detected during booting up.

Note:

- Radio Frequency is set as auto if DFS is enabled

Transmission Power – Select the total transmission power for the

radio interface.

5. Click Submit

6. Click Save & Apply