User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

If Authentication Mode is WPA2:

AES - This algorithm provides enhanced security over TKIP, and is the only

encryption algorithm supported by the 802.11i standard.

4. Select suitable EAP method mode in EAP Method:

PEAP-MSCHAPV2

TTLS-MSCHAPV2

TTPS-PAP

TTLS-CHAP

5. Provide username in Username for authentication.

6. Provide password in Password for authentication.

7. Click Submit

8. Click Save & Apply

4.1.4.1.3.5. Configure Station to associate network with WPA-PSK /

WPA2-PSK authentication

Figure 39 – WPA2-PSK Authentication of Station

1. Go to Configuration > Wireless > Radio0(2.4G) > Station > WLAN

Security

2. Select WPA-PSK / WPA2-PSK in Authentication Mode

3. Select suitable encryption mode in Cipher Mode as the followings:

If Authentication Mode is WPA:

TKIP + AES - This algorithm automatically selects TKIP or AES based on the

client’s capabilities

TKIP - This algorithm provides greater compatibility with older client

devices, but is not supported by the 802.11n standard.

AES - This algorithm provides enhanced security over TKIP, and is the only

encryption algorithm supported by the 802.11i standard.

If Authentication Mode is WPA2:

AES - This algorithm provides enhanced security over TKIP, and is the only

encryption algorithm supported by the 802.11i standard.

4. Type a string between 8 and 64 characters long in Pass Phrase that

matches with remote AP

5. Click Submit

6. Click Save & Apply