User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

4.1.4.1.3.3. Configure Station to associate network with Shared Key

authentication

Figure 37 - Shared Key Authentication of Station

1. Go to Configuration > Wireless > Radio0(2.4G) > Station > WLAN

Security

2. Select Shared in Authentication Mode

3. Select WEP in Cipher Mode

4. Select key number 1 – 4 in Default WEP Key (see 4.2.15 on page 64

for more detail)

5. Click Submit

6. Click Save & Apply

4.1.4.1.3.4. Configure Station to associate network with WPA / WPA2

authentication

Figure 38 – WPA2 Authentication of Station

1. Go to Configuration > Wireless > Radio0(2.4G) > Station > WLAN

Security

2. Select WPA / WPA2 in Authentication Mode

3. Select suitable encryption mode in Cipher Mode as the followings:

If Authentication Mode is WPA:

TKIP + AES - This algorithm automatically selects TKIP or AES based on the

client’s capabilities

TKIP - This algorithm provides greater compatibility with older client

devices, but is not supported by the 802.11n standard.

AES - This algorithm provides enhanced security over TKIP, and is the only

encryption algorithm supported by the 802.11i standard.