User's Manual

33
Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Guide
Altai Technologies Ltd. All rights reserved
Configure WLAN with WAPI Authentication (see 4.1.3.1.4.6 on page
27)
Configure WLAN with WAPI-PSK Authentication (see 4.1.3.1.4.7 on
page 29)
4.1.4. Configure Radio Interface as Station
(STA/CPE)
4.1.4.1. Radio 0 – 2.4GHz Radio
4.1.4.1.1. Radio General Configuration
Figure 32 – Radio0 General Setting of Station
1. Go to Configuration > Wireless > Radio0(2.4G) > General;
2. Select Enable Radio checkbox to enable radio interface
3. Select Station in Radio Mode
4. Change the following settings:
Transmission Power – Select the total transmission power for the
radio interface.
5. Click Submit
6. Click Save & Apply