User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

4.1.3.1.3. WLAN 0-15 General Configuration

Figure 19 – WLAN Detail Settings of WLAN 0 of AP

1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN 0-15 >

More…

2. Change the following settings:

Hide SSID [Optional] – Select the checkbox to hide SSID name from

its beacon frame

SSID – Provide a unique name for the particular WLAN

Note:

- If you want to configure the same SSID on two different WLAN;

their security setting MUST be different from each other.

User Isolation [Optional] – Select the checkbox to block user

communication within the same SSID in the AP directly.

DHCP Trust Port [Optional] - Deselect the checkbox to prevent illegal

DHCP servers offering IP address to DHCP clients via this WLAN.

Access Traffic Right – Specify the privilege of associated clients;

Full Access

Associated client can access Internet and

manage AP

AP Management Only

Associated client can manage AP only, but

not able to access the Internet

AP Management Disable

Associated client can access the Internet,

but not able to manage AP

Max Clients - Specify the maximum associated clients between 1

and 256 on this WLAN. 256 is the default setting.

Note:

- Max Clients in WLAN 0 – 15 MUST be smaller than or equal to

( ≥ ) the Max Clients setting in 4.1.3.1.1 Radio General

Configuration