User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

4.1.3. Configure Radio Interface as Access Point

(AP)

4.1.3.1. Radio 0 – 2.4GHz Radio

4.1.3.1.1. Radio General Configuration

Figure 17 – Radio0 (2.4G) General Settings of AP

1. Go to Configuration > Wireless > Radio0(2.4G) > General;

2. Select Enable Radio checkbox to enable radio interface

3. Select AP in Radio Mode

4. Change the following settings:

Country Code – Select an option that matches your device’s

installation location; Hong Kong is the default setting.

Note:

- Country code enforces regulatory restrictions on radio

frequencies and maximum transmission power that the AP

can operate in.

Wireless Mode – Select suitable Wi-Fi operating mode for the AP;

2.4G 11Mbps (802.11 b)

2.4G 54Mbps (802.11 bg)

2.4G 54Mbps (802.11 g-only)

2.4G 216.7Mbps (802.11 ng HT20); Default Setting