User's Manual

Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point

Configuration Guide

3.3. Configure as Repeater

1. Go to Configuration > Network > General > WAN Settings

2. Select suitable internet connection type (DHCP / Static)

3. Configure IP Address on the device (for static internet connection

type only)

4. Click Submit

5. For 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >

General

For 5G Radio: Go to Configuration > Wireless > Radio1(5G) >

General

Figure 13 – 2.4G Radio General Setting of Repeater

6. Select Repeater as Operating Mode on 2.4G radio and/or 5G radio

the device.

7. Select suitable Country Code that matches your device’s installation

location.

8. Select the suitable Transmission Power

9. Click Submit