User's Manual

9
Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Guide
Altai Technologies Ltd. All rights reserved
3.2. Configure as Station (CPE/STA)
1. Go to Configuration > Network > General > WAN Settings
2. Select your ISP’s internet connection type (DHCP / Static)
3. Configure IP Address on the device (for static internet connection
type only)
4. Click Submit
5. For 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >
General
For 5G Radio: Go to Configuration > Wireless > Radio1(5G) >
General
Figure 11 –2.4G Radio General Setting of Station
6. Select Station as Operating Mode on 2.4G radio and/or 5G radio
the device.
7. Select suitable Country Code that matches your device’s installation
location.
8. Select the suitable Transmission Power.
9. Click Submit
10. For 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >
Station > More…
For 5G Radio: Go to Configuration > Wireless > Radio1(5G) > Station
> More…
Figure 12 – 2.4G Radio WLAN Setting of Station
11. Scan and select the suitable SSID your ISP provides
12. Click Submit