User's Manual

5
Altai A3 Series Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Guide
Altai Technologies Ltd. All rights reserved
Ethernet MAC
address
Reserved Purpose
Replaced MAC
byte
Secondary IP
address
XX:XX:XX:XX:XX:00
Invalid IP
A0
192.168.99.160
XX:XX:XX:XX:XX:01
For gateway
A1
192.168.99.161
XX:XX:XX:XX:XX:02
For operator
computer
A2
192.168.99.162
XX:XX:XX:XX:XX:03
For operator
computer
A3
192.168.99.163
XX:XX:XX:XX:XX:04
For operator
computer
A4
192.168.99.164
XX:XX:XX:XX:XX:FF
Invalid IP
AF
192.168.99.175
Table 3 - A3 Series Product Secondary IP Address
Example 2
Device Ethernet MAC address: 00:19:BE:20:03:FF
Secondary IP Address of this device:
192.168.99.175 (FF (HEX)  AF (HEX)  175 (DEC))
2.5. Interface Guide
Figure 4 – AP Status Overview
Web Administration Interface (Web UI) consists of five primary tabs:
Status Tab - Show system status information, like interfaces status,
system logs … etc.
Configuration Tab – Allow the configuration of device operation
parameters, such as IP address, VLAN, wireless LAN … etc.
Administration Tab – Allow the management of device, including
firmware update, configuration backup / restore, SNMP … etc.
Tools Tab – Provide tools for radio planning, diagnosis, and device’s
maintenance, like ping test, channel scan … etc.