User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc
Commercially Confidential
27
Figure 17 Advanced Wireless Radio Setting
4.12.6 Service Set IDentifier (SSID) and Virtual Access Point (VAP)
In order for the A3 smart WiFi and mobile clients to communicate, they must all be configured
to use the same SSID for communication both at the VAP and clients ends. SSID broadcast can
be enabled or disabled by selecting Suppress SSID. Suppress SSID is used to prevent
unauthorized users scanning for SSID while still allowing users who know the correct SSID to
connect.
VLAN can be enabled by adding different VLAN Tag ID. The traffic will pass through the
specific VLAN switch port when VLAN is enabled.
Each VAP setting (including SSID) can be altered by selecting Edit. The setting of each VAP is
shown in Figure 18. The default SSID for each VAP ID is Altai Wireless Network. VLAN Tag
can also be set here.
Figure 18 VAP Setting