User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc

Commercially Confidential

4.12.1 Wireless Mode and Radio Frequency

Altai A3 smart WiFi can offer both 2.4GHz radio and 5GHz radio access, the following tables

list the operation mode and available frequency under the particularly wireless mode. Default

setting of AP mode radio is working on 2.4GHz 300Mbps (802.11n HT 40ext ch+1) and default

channel is channel 6 (2437MHz).

2.4GHz Radio Mode Data Rate Channels Radio Frequency

802.11b 11 Mbps 1,2,3,4,5,6,7,8,9,10,11 2.412GHz-2.462GHz

802.11b/g 54 Mbps 1,2,3,4,5,6,7,8,9,10,11 2.412GHz-2.462GHz

802.11g 54 Mbps 1,2,3,4,5,6,7,8,9,10,11 2.412GHz-2.462GHz

802.11na HT20 130 Mbps 1,2,3,4,5,6,7,8,9,10,11 2.412GHz-2.462GHz

802.11n HT40ext ch+1 300 Mbps 1,2,3,4,5,6,7 2.412GHz-2.442GHz

802.11n HT40ext ch-1 300 Mbps 5,6,7,8,9,10,11 2.432GHz-2.462GHz

5GHz Radio Mode Data Rate Channels Radio Frequency

802.11a 54 Mbps 149, 153, 157, 161, 165 5.745GHz-5.825GHz

802.11na HT20 130 Mbps 149, 153, 157, 161, 165 5.745GHz-5.825GHz

802.11na HT40ext ch+1 300 Mbps 149, 157 5.745GHz-5.785GHz

802.11na HT40ext ch-1 300 Mbps 153, 161 5.765GHz-5.805GHz

Table 2 AP mode Radio operation wireless mode, channel and Radio Frequency

4.12.2 Auto Channel Selection

By default, the Auto Channel Selection is disabled; the A3 is fixed on Channel 6. When

Enabled of Auto Channel Selection is chosen, A3 smart WiFi can scan all available radio

channels which are assigned to the regulatory domain. The “cleanest” channel is then selected as

the operating channel.

NOTE: After changing frequency channel, it takes around 3 minutes for A3 to optimize

its radio performance.

4.12.3 Maximum Clients

A value between the ranges from 0 to 256 can be filled in Maximum Clients blank. This feature

can limit the total associated clients under the particular radio.