User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc
Commercially Confidential
24
4.11 S ETUP – W IRELESS R ADIO P ARAMETER
Wireless radio parameters can be modified under Configuration in the menu bar. Internal
Radio uses the antennas at the side of A3. By selecting the icons, Internal Radio can operate on
different modes separately: AP mode, Repeater mode, Bridge mode and Disable. The default
setting of Internal Radio is AP mode.
4.12 AP M ODE
Wireless Radio working on AP mode is used for clients association. Altai A3 smart WiFi
combine 802.11b/g and draft 802.11n together to offer both 2.4GHz radio and 5GHz radio
access for clients.
The Radio Enable Mode, Wireless Mode, Auto Channel Selection, Radio Frequency
(Channel), Maximum Clients, Transmit Power, Advanced Settings and VAP can be configured
by selecting AP icon under Internal Radio, as shown in Figure 16.
Figure 16 Wireless Radio Parameter Configuration