User's Manual

TPS09-005_rev1 0_A3_Configuration_Manual_-_fm_1 0 0 6 _FCC.doc
Commercially Confidential
18
4.8 S WITCH M ODE
4.8.1 Static IP address
In IP Assignation, there are two kinds of working mode for A3 base station: Static IP
address and DHCP Client. In Switch mode, by clicking Network Configuration in the System
page, users can configure the IP Address, Subnet Mask and Gateway Address, as shown in
Figure 10 and Figure 11.
Figure 10 The IP address here is the Ethernet interface of the A3
Figure 11 Network Configurations under Switch mode