User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

1 INTRODUCTION

This manual is to summarize how to perform configuration for the ALTAI C1n Super WiFi

CPE/AP through web-admin interface.

2 C1N MODEL AND FIRMWARE VERSION

This manual is applicable for the following models and firmware version:

Product name : C1n Super WiFi CPE/AP

Model number : WA1011N-G

Firmware version: v1.0.0.x

3 GETTING START

3.1 SETUP LOCAL AREA CONNECTION ON YOUR PC

C1n Super WiFi CPE/AP can be connected with your PC in wired mode or in wireless mode. In

the followings, wired mode will be introduced. This is because the configurations are similar in

wireless mode, unless SSID has to be configured in both C1n Super WiFi CPE/AP and PC.

 RJ-45 Ethernet Cable Straight

Cable has to be used if C1n Super WiFi CPE/AP and your

PC are connected by a switch or a hub

 RJ-45 Ethernet Cable Crossover

Cable has to be used if C1n Super WiFi CPE/AP and

your PC are connected directly

Please kindly refer to the Altai C1n Super WiFi CPE/AP Installation Guide.

Start Network Configuration on your PC.

For Windows XP

user,

1. Click the “start” menu and choose “Control Panel”.

2. Click “Network Connections”.

Figure 1 Control Panel in Windows XP