User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc
Commercially Confidential
48
6 SOFTWARE UPGRADE THROUGH WEB-ADMIN
The firmware can be upgraded by selecting Firmware Update under the field of
Administrations in the menu bar respectively. Please note that the connection link should be
maintained during file transfer to prevent interruption to the system.
6.1 FIRMWARE UPDATE THROUGH HTTP OR HTTPS
Follow the steps below to perform the Firmware Update with a firmware image file (.bin) in
local directory through HTTP or HTTPS.
1. Click the Browse… bottom to bring up a file chooser dialog which you can specify the
name and location of the firmware image you want to import.
2. Click the Update Firmware bottom to start uploading the new firmware from the local
directory, see Figure .
3. If the firmware upgrade is successful, a window will appear as Figure 44 Successful
Firmware Update - Web-admin. C1n Super WiFi CPE/AP will reboot automatically.
4. Type in URL with http://<ip address of C1n>, note ‘http’ can not link to the web admin
of C1n under the new firmware version.
5. After the C1n reboots, check the firmware version by selecting
About under the field of
Administrations in the menu bar, as discussed in Section 4.2, to ensure the expected
firmware is uploaded.
6. Select Factory Default under the field Administrations in the menu bar and click Reset
to Factory Default (address retained) or Reset to Factory Default to make the default
settings effective. Note: If press Reset to Factory Default with address retained, the IP
address of C1n web-admin will not be changed after rebooting the AP. While
Reset to
Factory Default is chosen, IP address of C1n Super WiFi CPE/AP will be changed into
192.168.1.20 .
7. Click the icon REBOOT AP to reboot the C1n Super WiFi CPE/AP.
Warning: The C1n Access Point will not be working properly if there is some mistaken in the
upgrade process. You are NOT advised to perform firmware upgrade if you have not received
any training from ALTAI or its partners.