User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

WPA/WPA2 or WPA-PSK/WPA2-PSK can be enabled by selecting WPA/WPA2 or

WPA-PSK/WPA2-PSK for Authentication Mode. The AES and TKIP are the two available

options for Cipher Mode.

The related settings are shown in Figure 28, Figure 32 and Figure 32

respectively.

NOTE: Click the Update icon to store the WEP or WPA settings.

Figure 30 WPA-AES Settings

RADIUS server is used for authentication. C1n can store separate RADIUS server address for

each VAP. It is only visible when the Authentication Mode is set to “WPA”. The default setting

of RADIUS server port is 1812. RADIUS secret shared password between the RADIUS server

and C1n CPE/AP. A password up to 128 characters long can be added. The VLAN IP address

and VLAN Subnet Mask configured on the VAP security web page will be used only when C1n

runs in the following conditions.

1. C1n Super WiFi CPE/AP runs in switch mode and VLAN is enabled.

2. The VAP does not belong to native VLAN.

3. The authentication mode is WPA