User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

Figure 26 AP mode VAP Setting

4.11.13 VLAN Tag

VLAN can be enabled by adding different VLAN Tag ID. The traffic will pass through the

specific VLAN switch port when VLAN is enabled.

Each VAP setting (including SSID) can be altered by selecting Edit. The setting of each VAP is

shown in Error! Reference source not found.. The default SSID for each VAP ID is Altai

Wireless Network. VLAN Tag can also be set here.

NOTE: VLAN Tag can be enabled only when C1n works under AP mode.