User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

Figure 22 Bandwidth Control Configuration

4.11.9 Station Mode

Under VAP web-site interface, AP mode and Station mode can be chosen. By default, C1n is

set to Station, and backhaul link can be established through associating the Station VAP with

the remote APs. That means Station VAP works as backhaul link, clients can connect with C1n

by Ethernet end. The Security configuration should match to the remote SSID security type and

pass phase.

There are three different station modes: NAT mode, WDS mode and MAC address

translation mode (MAT mode).

When station works in NAT mode, C1n works in Gateway mode and the Station mode VAP is

enabled. Repeater works in WDS mode when WDS is enabled and C1n works in Station mode.

The MAT mode can be enabled when C1n runs in Switch mode and WDS is disabled.

Station Mode

System Mode

VAP0 working mode

WDS status

NAT mode

Gateway mode

Station mode

Disabled

WDS mode

Switch mode

Station mode

Enabled

MAT mode

Switch mode

Station mode

Disabled

Table 6 Repeater Mode Setting Method