User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc
Commercially Confidential
31
Figure 21 Advanced 2.4GHz Radio Setting
4.11.8 Bandwidth Control
Under 2.4GHz Radio Advance setting, administer can enable ‘Traffic shaping’. This feature
provides radio level bandwidth control in both UL & DL. This feature is disabled by default. By
enable ‘Traffic Shaping’, user can define value of Incoming Traffic Limit, Incoming Traffic
Burst, Outgoing Traffic Limit and Outgoing Traffic Burst.
Incoming Traffic Limit: Default value is 512Kbit/s. It can specify the maximum bandwidth
value for traffic passing from wireless interface to Ethernet interface.
Incoming Traffic Burst: Default value is 0Kbytes. It can specify the data volume to which
incoming Traffic Limit will not be effective afterwards data connection is initiated.
Outgoing Traffic Limit: Default value is 512Kbit/s. It can specify the maximum bandwidth
value for traffic passing from Ethernet interface to wireless interface.
Outgoing Traffic Burst: Default value is 0Kbytes. It can specify the data volume to which
outgoing Traffic Limit will not be effective afterwards data connection is initiated.