User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc
Commercially Confidential
27
4.11 SETUP – 2.4GHZ RADIO PARAMETER
The Radio Operation Mode, 2.4GHz Radio, Wireless Mode, Auto Channel Selection, Radio
Frequency (Channel), Transmit Power, Channel Bandwidth, Advanced Settings and VAP can
be configured by selecting 2.4GHz Radio under Configuration in the menu bar, as shown in
Figure 20.
Figure 20 2.4GHz Radio Parameter Configuration
The 2.4GHz Radio can be enabled or disabled by selecting 2.4GHz Radio.
Under Station, C1n will follow the master AP channel. Under AP mode, the Auto Channel
Selection is disabled by default; the C1n is fixed on Channel 6.
When Enabled of Auto Channel
Selection is chosen, C1n Super WiFi CPE/AP can scan all available radio channels which are
assigned to the regulatory domain. The “cleanest” channel is then selected as the operating
channel.
NOTE: After changing frequency channel, it takes around 3 minutes for C1n to optimize
its 2.4GHz radio performance.