User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

4.9.2 LAN Configuration

In Gateway Mode, the C1n can be a DHCP server, a DHCP relay or none of them.

When the DHCP Server Mode sets to Server, the C1n will act as a DHCP server and use the

settings specified in the field Start IP Address, Maximum Number of DHCP Users and DNS to

serve the wireless clients.

1. Configure the Local IP Address and Subnet Mask Length. Local IP Address is the

gateway IP address for the client who associates C1n CPE/AP. Only the clients under

the same subnet of local IP address can get IP address from C1n Super WiFi CPE/AP.

2. Configure the Start IP Address, Maximum Number of DHCP Users, and DNS, see

Figure 16.

3. Reboot the C1n

Figure 16 Configure DHCP Server