User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

Figure 15 PPPoE Configuration

NOTE: The DNS Auto Update should be set to Disable when using PPPoE. User need

to configure the DNS server IP address manually.

PPPoE Active Mode, Max Idle Time and Redial Period can be configured.

When “Connect on Demand” is selected, PPPoE will establish the connection with the remote

access concentrator only when hosts in the local subnet need to access the internet. If the

parameter is set “Keep Alive”, PPPoE will establish the connection with the remote access

concentrator upon boot-up.

Default setting of Max Idle Time is 30 minutes. Only when PPPoE works under Connect on

Demand mode, it will be disconnected if PPPoE connection has been idle for the Max Idle

Time.

When last attempt failed, C1n CPE/AP will attempt to establish the PPPoE connection at Redial

Period.