User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

4.8.4 Static IP address

By enabling Static IP address and clicking the icon Update, the C1n CPE/AP will be fixed an

IP address by administrator after rebooting.

The IP Address, Subnet Mask and the Gateway Address should be configured by the user,

unless

the user prefers using the DHCP client setting.

4.8.5 DNS Auto Update

By setting DNS Auto Update to Enabled and clicking the icon Update, the C1n Super WiFi

CPE/AP will acquire a DNS Server IP address via the DHCP Server after rebooting. User need

not to set a DNS Server IP Address manually.

Without enabling the C1n as a DHCP Client, the DNS IP Address and DNS Domain Name

should be configured by the user.

NOTE: DNS Auto Update can only be enabled when DHCP client is enabled. If the

DNS Auto Update is enabled, it must be used in conjugation with either the DHCP Client or the

PPPoE Mode being enabled. If both the DHCP Client and the PPPoE Mode are disabled then the

DNS Auto Update must also be set to Disabled.