User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc
Commercially Confidential
18
4.8 SWITCH MODE
4.8.1 Static IP address
In IP Assignation, there are two kinds of working mode for C1n CPE/AP: Static IP address
and DHCP Client. By default, C1n CPE/AP is set to DHCP Client under switch mode. In
Switch mode, by clicking Network Configuration in the System page, users can configure the
IP Address, Subnet Mask and Gateway Address, as shown in Figure 11 , Figure 12 and Figure
12.
Figure 11 The IP address here is the Ethernet interface of the C1n
Figure 12 DHCP client under Switch mode