User's Manual

C1n_Configuration_Manual_-_fm_1.0.0.x_for_US_&_Canada_20130116.doc

Commercially Confidential

and Local IP Address Mask information must be entered to specify the C1n local interface for

serving the wireless client.

In Switch mode, VLAN mode is by default disabled and clients in different SSID under the

same C1n can communicate with each other. However, if VLAN is enabled, each SSID can be

edited with a specific VLAN tag value. Only clients with same VLAN tag in same or different

SSID can communicate. Moreover, in this mode, DHCPS, NAT and PPPoE configuration have

no effort.

However, in Gateway mode, the DHCPS, NAT and PPPoE configurations can be configured but

the VLAN has no effort.

In Switch mode,

 VLAN can be configured

 DHCPS, NAT and PPPoE are disabled

In Gateway mode

 VLAN is disabled

 DHCPS, NAT and PPPoE can be configured