User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc
Commercially Confidential
7
1 I NTRODUCTION
This manual is to summarize how to perform configuration for the ALTAI C1 Super WiFi CPE
through web-admin interface.
2 C1 M ODEL AND F IRMWARE V ERSION
This manual is applicable for the following models and firmware version:
Product name : Altai C1 WiFi CPE
Model number : WA1011C
Firmware version: v1.0.0.1
3 G ETTING S TART
3.1 S ETUP L OCAL A REA C ONNECTION ON Y OUR PC
C1 Super WiFi CPE can be connected with your PC in wired mode or in wireless mode. In the
followings, wired mode will be introduced. This is because the configurations are similar in
wireless mode, unless SSID has to be configured in both C1 Super WiFi CPE and PC.
• RJ-45 Ethernet Cable Straight Cable has to be used if C1 Super WiFi CPE and your PC
are connected by a switch or a hub.
• RJ-45 Ethernet Cable Crossover Cable has to be used if C1 Super WiFi CPE and your
PC are connected directly.
Please kindly refer to the Altai C1 Super WiFi CPE Installation Guide.
Start Network Configuration on your PC.
For Windows XP user,
1. Click the “start” menu and choose “Control Panel”.
2. Click “Network Connections”.
Figure 1 Control Panel in Windows XP