User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc
Commercially Confidential
35
Figure 31 Access Point is Rebooting
4.14 R ESTORE C ONFIGURATION TO D EFAULT S ETTING
The choices of factory default can be chosen by selecting Factory Default under
Administrations in the menu bar.
The default settings (IP Address, Subnet Mask, Default Gateway Address and Remote
Bridge Configurations are retained) can be restored by selecting the icon Reset to Factory
Default (address retained) or Reset to Factory Default, as shown in Figure . Please reboot the
C1 CPE afterwards.
Note: after resetting to factory default without address retained, please type
<http://192.168.1.20> to open C1 CPE web-admin.
Figure 32 Reset to Factory Default Setting in Web-admin