User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc
Commercially Confidential
34
Figure 26 System Log Setting
4.13 R EBOOT
System reboot of C1 CPE can be chosen by selecting Reboot under Administration in the
menu bar. It is required to select Reboot Base Station to confirm this action, as shown in
Figure .
When the C1 CPE is rebooting, a message “Please wait… Base Station is Rebooting” is
shown on the window, as shown in Figure . It will take about 20 seconds for the access point to
boot up.
Figure 30 Reboot Window