User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc

Commercially Confidential

Figure 23 WPA-TKIP Settings

RADIUS server is used for authentication. C1 can store separate RADIUS server address for

each VAP. It is only visible when the Authentication Mode is set to “WPA”. The default setting

of RADIUS server port is 1812. RADIUS secret shared password between the RADIUS server

and C1 CPE. A password up to 128 characters long can be added. The VLAN IP address and

VLAN Subnet Mask configured on the VAP security web page will be used only when C1 runs

in the following conditions.

1. C1 Super WiFi CPE runs in switch mode and VLAN is enabled.

2. The VAP does not belong to native VLAN.

3. The authentication mode is WPA.

Figure 24 WPA-PSK Settings