User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc

Commercially Confidential

4.11 S

ETUP

–

2.4GH

ADIO

ARAMETER

The 2.4GHz Radio, Wireless Mode, Auto Channel Selection, Radio Frequency (Channel),

Transmit Power, Maximum Clients, Advanced Settings and VAP can be configured by

selecting 2.4GHz Radio under Configuration in the menu bar, as shown in Figure 18.

Figure 18 2.4GHz Radio Parameter Configuration

The 2.4GHz Radio can be enabled or disabled by selecting 2.4GHz Radio.

By default, the Auto Channel Selection is disabled; the C1 is fixed on Channel 6. When Enabled

of Auto Channel Selection is chosen, C1 Super WiFi CPE can scan all available radio channels

which are assigned to the regulatory domain. The “cleanest” channel is then selected as the

operating channel.

NOTE: After changing frequency channel, it takes around 3 minutes for C1 to optimize

its 2.4GHz radio performance.

4.11.1 Transmit Power

The value of the Transmit Power depends on both the gain of the 2.4GHz antenna and the

maximum value of the Effective Isotropic Radiated Power (Max EIRP) allowed by the country

in which C1 is used. The Transmit Power should be configured within the given range as shown

in Figure 18.

NOTE: Click the Update icon to store the changed settings.