User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc

Commercially Confidential

When the DHCP Server Mode sets to Relay, the C1 will redirect all DHCP requests from the

wireless clients to a backend DHCP server with IP address specified by the Relay Server IP

Address.

1. Configure the Relay Server IP Address, see Figure 15.

2. Reboot the C1

Figure 15 Configure DHCP Relay Server

When the DHCP Server Mode sets to Disabled, the C1 will neither be a DHCP server nor a

DHCP Relay and hence the wireless clients CANNOT get IP addresses from the C1 CPE to

access the Internet. Instead, each wireless client should set a fixed static IP address which is in

the same network domain as the C1.