User's Manual

C1_Configuration_Manual_-_fm_1.0.0.1.doc
Commercially Confidential
13
4.4 NTP C ONFIGURATION
NTP is a network time protocol for the AP to synchronize the system time. There is no NTP
server IP address by default. If NTP is needed, IP address of the NTP server must be added and
C1 will synchronize with the NTP server. This measure is useful to maintain the network and
make sure all APs using the same system time by setting the same NTP server.
Figure 9 NTP Configuration
NOTE: Click the Update icon to store the changed settings.
4.5 SNMP C ONFIGURATION
In the SNMP Manager, the administrator can change the Read Community and Write
Community. Access Subnet IP and Access Subnet Mask can be configured to specify the C1’s
SNMP Manger. Notification Server IP addresses can be added for SNMP control. They are
parameters used for SNMP control between Altai C1 and AWMS system.
By enabling SNMP Manager ACL mode, the C1 will only be managed by the AWMS which IP
is located in the ACL list with correct Read Community, Write Community and SNMP IP
address.