User's Manual

Altai C2s

Dual-Band 2x2 802.11ac

WiFi AP/CPE

Installation Guide

1. Introduction

This guide is designed to provide the information needed to mount Altai C2s

Super WiFi AP/CPE at the site location.

The document is applicable for hardware platform C2s and the following

models.

Product name: C2s Dual-band 2x2 802.11ac WiFi AP/Bridge

It is assumed in this document that a site survey has been performed before

the site installation. The appropriate antenna pole and AP locations have

been selected. It is a good practice to have a document which consists of a

map and drawing illustrating the AP and poles locations. A planning on IP

network is also an important issue for network planning.

The user may need to refer the following document during C2s installation

and Configuration.

[1] C2s Configuration Manual

[2] C2s Data Sheet