User's Manual

Altai C2s

Dual-Band 2x2 802.11ac

WiFi AP/CPE

Installation Guide

2.7. C2s Waterproof Protection

Especially for outdoor installation, waterproof protection can enhance the

protection from water Ingress. Both the LAN cable and the unit should be

wrapped.

1. Wrap the cable with a layer of rubber tape. Start from 5cm below the

connector. Wrap a loop and overlap a half. Continue until it reaches

under the connector.

2. Wrap the C2s unit with a layer of rubber tape. Start from 1cm above of

the lid. Wrap a loop and overlap a half. Continue until it reaches the

bottom. The bottom should be completely shielded by the rubber tape.