User's Manual

Altai C2s

Dual-Band 2x2 802.11ac

WiFi AP/CPE

Installation Guide

2.6. Power Options and Cable Connection Instructions

Option 1: AC Adapter and DC Injector

1. Connect C2s ETH0 port to a DC injector’s “PWR+DATA” port with an

Ethernet Cable.

2. Connect a computer to the DC injector’s “DATA” port with another

Ethernet Cable.

3. Connect the AC power adapter to the DC injector and plug it into a

power socket.

4. Make sure the Power LED light is yellow and ETH 0 LED light is

blue/green.

Option 2: 802.3at-compliant PoE switch / PoE Injector

1. Connect C2s ETH0 port to an 802.3at to Passive PoE Adapter’s

“PWR+DATA” port with an Ethernet Cable.

802.3at-

Compliant PoE

Switch

802.3at to Passive PoE

Adapter (Separately ordered)