User's Manual

Altai C2s

Dual-Band 2x2 802.11ac

WiFi AP/CPE

Installation Guide

2.5. Mounting Options

Option 1: Pole Mount

1. Orient the device to point to the target coverage area (for AP mode) or

to the target AP (for Station mode).

2. Loop two cable ties through the slots on the back of the device and then

wrap them around the pole.

3. Tighten the cable ties to ensure the device is firmly in place.

Option 2: Wall Mount

1. Using the back mount base as reference, mark the location of the

mounting holes on a flat wall surface.

2. Drill mounting holes on the marked locations. The two holes should be

60mm (2.3 inches) apart.

3. Fasten the device to the wall using the mounting anchors and screws

provided.

60mm