User's Manual

Altai C2s

Dual-Band 2x2 802.11ac

WiFi AP/CPE

Installation Guide

2.3. Preparation for Installing C2s

Before installation, please prepare the following tools:

1) Needle-Nose Pliers (for cable feed-through)

2) Screw Driver (for wall mount)

3) RJ45 Shielded Connector Crimper

4) STP CAT5e/6 Straight Cable x 2

5) Waterproof Sealing Tapes and Electrical Tapes

6) Grounding Cable

7) An 802.3at to Passive PoE Adapter (Optional and ordered separately

when using with 802.3at-compliant PoE switch or PoE injector)

2.4. Cable Feed-Through

1. Prepare a pair of needle-nose pliers.

2. Follow the instructions on the drawing below to cut a feed-through hole

for ETH0 Port cabling.

3. Cut another hole with pliers for ETH1 Port cabling if necessary.

For ETH1 Port Cabling

For ETH0 Port Cabling