User's Manual

Quick Setup Guide

1. Change TCP/IP Setting on your computer

For Windows 7 users,

1. Go to Control Panel, click Network and Sharing Center and then choose

the adapter that you want to connect to A2c unit. In this example,

adapter “Local Area Connection 2” is in connection with A2c. Click it and

then click Properties.

2. Under the Networking tab, click Internet Protocol Version 4 (TCP/IPv4) in

the list box “This connection uses the following items”, and then click

Properties.

3. Type in the following IP address and Subnet mask:

 IP address: 192.168.1.2

 Subnet mask: 255.255.255.0

4. Click OK to close the Internet Protocol Version 4 (TCP/IP) Properties dialog

box and click OK again to close the Local Area Connection Properties

dialog box.