MSDS

MATERIAL DATA SAFETY SHEET
PRODUCT NAME: Chrome FX Basecoat/Topcoat Hardener
PRODUCT CODE: CFX-BH712/CFX-TC520 DATE: Jan. 1, 2012
Page 3 of 6
result in pressuration. Care should be taken when re-opening partly used containers. Isolate from
sources of heat, sparks, and open flame. No sparking tools should be used.
Avoid skin and eye contact. Avoid the inhalation of dust, particulates and spray mist arising
from the application of this preparation. Avoid inhalation of dust from sanding. Smoking,
eating, and drinking should be prohibited in application area. For personal protection see Section
8. Never use pressure to empty: container is not a pressure vessel. Always keep in containers of
same material as the original one. Comply with the health and safety at work laws.
Storage:
Observe label precautions. Store between 10 and 25˚C in a dry, well ventilated place away form
sources of heat and direct sunlight. Keep away from sources of ignition. Keep away from
oxidizing agents, from strongly alkaline and strongly acid materials as well as of amines,
alcohols and water. No smoking. Prevent unauthorized access. Containers which are opened
must be carefully resealed and kept upright to prevent leakage.
SECTION VIII – EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use
of local exhaust ventilation and good general extraction. If these are not sufficient to maintain
concentrations of particulates and solvent vapor below the OEL, suitable respiratory must be
worn.
Exposure Limits
Occupational exposure limit for :
NAMES CAS Number EINECS-No. STEL LTEL
Hexamethylene diisocyanate 822-06-0 212-485-8 0.02ppm 0.005ppm
methyl acetate 79-20-9 201-185-2 250ppm 200ppm
4-chloro-a,a,a,-trifluorotoluene 98-56-6 202-681-1 NE 25ppm
petroleum solvent lt. aromatic 64742-95-6 265-199-0 100ppm 25ppm
1,2,4, trimethyl benzene 95-63-6 202-436-9 NE 25ppm
n-butyl acetate 123-86-4 204-658-1 200ppm 150ppm
Personal Protection
Respiratory protection:
If workers are exposed to concentrations above the exposure limit they must use appropriate
certified respirators.
Hand protection:
For prolonged or repeated handling, use barrier creams, as they may help to protect the exposed
areas of the skin. They should however not be applied once exposure has occurred.
Eye protection:
Use safety eyewear designed to protect against splash of liquids.
Skin protection:
Personnel should wear anti-static clothing made of natural fiber or of high temperature resistant
synthetic fiber.