Instructions / Assembly

about 5-10 minutes between coats.

PROBLEM:

Product surface accepted Basecoat and Intermediate Chrome Coat without issue, but

appearance problems occurred after applying clear Topcoat.

CAUSE / SOLUTION:

The single most common cause of issues with the appearance after top coating is the water

purity. Always, ALWAYS test your water to be sure it has not gone bad.

Let the chromed surface sit for at least one hour after chroming, at 75 degrees F, to insure all

moisture has evaporated.

We recommend that you consider investing in a water tester to use for this process, as a

rigorous testing of the water can eliminate most issues. Over time, DI/Distilled water will

degrade, and will then not be pure enough for this process.

If you are still experiencing problems, after testing the ChromeFX™ Intermediate Coat on a

piece of glass and looking through this troubleshooting guide, please do not hesitate to

through Thursday, between the hours of 9 AM and 4 PM. Fridays 9 AM until 12 Noon. The

toll free number is 1-800-999-4120