Instructions / Assembly

Chemicals should be mixed fresh for each days use. The A and B components, and the
Activator, are active chemicals, and have a life span. After opening, we recommend storing
the A and B components, and Activator in a cool dry place, or even refrigerate them for
longest life span. Stored in this manner, you should expect about a 9 months to a years’ life
span for the chemicals.
LET ALL MATERIALS ACCLIMATE TO ROOM TEMPERATURE BEFORE USING.
Chemical Preparation:
One you have your base coat properly applied, and cured, prepare your pump system for
chroming.
When using your Pump System, always use the same containers for the same chemicals.
These chemicals are easily cross contaminated. The containers are labeled accordingly.
Sensitizer/Activator Solution - Chemical (C): Using the little droppers provided, mix 8
milliliters of part “C” concentrate to 10 ounces (300 ml) of distilled/de-ionized water in one of
your mixing cups. Pour this into the single chamber pump sprayer labeled “C”.
ALWAYS LET YOUR ACTIVATOR SIT FOR ABOUT 1 HOUR BEFORE USING, TO
INSURE IT HAS REACHED FULL POTENCY AND STABILITY.
Chroming Solutions A and B: (All mixing ratios are by volume and not by weight)
Always use the same milliliter droppers (included in your kit) for the same chemicals.
These chemicals are easily cross contaminated.
Part A: Using the little droppers provided, mix 4 milliliters of PART A concentrate with 10
ounces (300 ml) of water in one of the provided mixing cups, and pour into the chamber
marked “A” on your Double Pump Sprayer.
Part B: Using the little droppers provided, mix 8 milliliters of PART B concentrate with 10
ounces (300 ml) of water in one of the provided mixing cups, and pour into the chamber
marked “B” on your Double Pump Sprayer.
Once mixed, these chemicals are god for about 24 hours.
A FEW WORDS ABOUT YOUR WATER:
Use the single pump sprayer labeled “DI Water” for your water.
THE IMPORTANCE OF YOUR WATER PURITY FOR THIS PROCESS IS EXTREMELY
CRITICAL, AND CANNOT BE OVER STATED. WE STRONGY RECOMMEND USING DE-
IONIZED WATER FOR THIS PROCESS.