USER'S MANUAL LOVESEAT WITH TABLE P7 7
Contact Us! Do NOT return this item. Contact our friendly customer service department for help first. Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the handtools close at hand.
Component List i are w rd Backrest 1 x2 pcs Seat 2 x2 pcs Right leg with arm 3 x1 pc Left leg with arm 4 x1 pc Left leg w/o arm 5 x1 pc Right leg w/o arm 6 x1 pc Cross bar 7 x2 pcs Cushion back 8 x2 pcs Cushion seat 9 x2 pcs Table top 10 x1 pc Table leg 11 x2 pcs ide ns Ha Lower table side 13 x2 pcs 3 Upper table side 12 x2 pcs
M4x50 mm Screw A x10 pcs M6x60 Screw B x28 pcs C Step 1 Allen Key x2 pcs A A A 12 A 12 10 Step 2 B B B 11 12 B 12 B 11 B B 4 B
Step 3 A A A A A Step 4 5 A
Step 5 B 1 B 5 3 B B B B B 2 B 7 B Step 6 6 B
Step 7 B 1 B 4 6 B B B 2 B B 7 B Step 8 7 B B
Step 9 Step 10 8 8 9 8 9
Step 11 view from front view from back unlock lock Step 12 8 8 9 9 9
OPTION 1 10
OPTION 2 11
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
