00® Please give us a chance to make i right and do better ! Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP | US office: Montana ~~ UK office: Ipswich ~~ AU office: Training DE office: Hamburg FR office: Saint Vigor Jacksonville PL office: Gdansk fe COST WAY' Contact Us! Contact our friendly customer service department for help first. = Do NOT return this item.
02 BB Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface.
L¢ COST WAY 02 BB Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface.
Roof Rake Head Assembly The assembly of the roof rake head requires hardware (the nut and bolts) included in the pack. Use the equipped open wrench for the nut and the hex wrench for bolts. Make sure to tighten the hardware connections for a secure assembly. Depress the small buttons on the pole adapter and Insert the pole adapter into the connector on the back of the roof rake head. Push freely until the two small buttons pop up in the holes on the connector (Fig. 1). Rake head Small buttons 04 (Fig.
COST WAY Roof Rake Head Assembly The assembly of the roof rake head requires hardware (the nut and bolts) included in the pack. Use the equipped open wrench for the nut and the hex wrench for bolts. Make sure to tighten the hardware connections for a secure assembly. Depress the small buttons on the pole adapter and Insert the pole adapter into the connector on the back of the roof rake head. Push freely until the two small buttons pop up in the holes on the connector (Fig. 1).
07 Connecting the Poles { Fig.4 ) To connect the roof rake head assembly with the pole handle, depress the small button at the end of the pose handle and insert it into the end of the pole adapter. Make sure the small button pops up in the hole on the pole adapter so the assembly is secured (Fig. 4). head assembly Pole handle ( Flag ) If additional reach is needed, connect the provided pole extensions between the pole handle and the rake head assembly.
